Enter the dimensions for your Roman blind -
Need help measuring? Check our helpful guide below
What do I need to measure? -
- Recess size:
Measure the width (wall to wall) and drop (ceiling to sill) of the window recess in at least three different places and enter the smallest of those measurements as your required blind width and drop measurements.
Select the "Recess size" option.
Please do not make any adjustment to the width as we will deduct 1cm from your measurement so that the blind will raise and lower smoothly within the recess.
- Blind size (exact):
First you should decide how much you would like the blind to overlap the recess by, we recommend a minimum of 5cm* for each side, top and bottom.
Enter your required width and drop measurements.
Select the "Blind size (exact)" option.
Please note that with the outside recess option, the headrail may be slightly wider than the finished fabric width.
*All these allowances are our guide and should be your own personal preference.
If you are measuring for a bay window then please click here
Click below for printable measuring guides -
Quick Measuring Tips!
Measure in several places to allow for any window irregularities and use the smallest of those measurements
Consider window handles and wall tiles that may obstruct the raising and lowering of the blind.
Always use a metal or wooden tape for better accuracy
Get someone else to help by holding one end of the tape
Always use something safe to stand on rather than stretch